Sanislim
for slimline sanitaryware suitable for powering a complete shower room

• Motor:  induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
• Watts (consumption): 400w
• Flow rate at max head l/min: 47
• Electrical supply: 220-240V 50Hz
• Discharge  horizontally to 40 metres or vertically to 4 metres
• Gravity fall on horizontal installations: 1/200
• Discharge Pipe Diameter: 22mm
• Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene
• Motor RPM: 2800 RPM
• Normal Running Time WC:
  10?20 secs approx or as required, to discharge shower etc
• Dimensions:
  330W x 263 O/H x 163D 
• A clearance of 375mm is required from floor level to the underside of a close-coupled suite to accomodate the discharge elbow.

Please note: The dimensions shown here are of the unit only and do not allow for these additional space requirements as they may differ for each installation. It is the responsibility of the purchaser or installer to ensure that the Saniflo product selected will fit in the chosen place of installation with due allowance for pipework runs, electrical connections etc.